Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Before setup of the IPD please ensure that your IPD has been installed by following the installation instructions:




Step 1

Once the IPD has completed the initial boot sequence, it will display a pairing screen with a 10 character pairing code.

If the IPD will be installed in a self-hosted solution, you should change the URL prior to moving on to step 4. You can find more info on this procedure in the Update Configuration Settings section.

Step 2

Within the XT Web application - navigate to the Administration → XT Programmers page and select Pair New Device and enter the pairing code displayed on the IPD, as well as a short description for this unique unit.

Step 3

The IPD will automatically connect to XT Web and should display a screen with the Medeco splash screen, prompting the user to Insert Key at the bottom of the screen. If the IPD does not change from the Pairing screen after 2-5 minutes, refer to the troubleshooting section. 

Step 4

Insert a key with a pending or active schedule into the program port and verify it services. 

Image Removed

Image Removed

Image Removed

Before setup of the IPD please ensure that your IPD has been installed by following the installation instructions:

Step 1

Once the IPD has completed the initial boot sequence, it will display a pairing screen with a 10 character pairing code.

If the IPD will be installed in a self-hosted solution, you should change the URL prior to moving on to step 4. You can find more info on this procedure in the Update Configuration Settings section.

Step 2

Within the XT Web application - navigate to the Administration → XT Programmers page and select Pair New Device and enter the pairing code displayed on the IPD, as well as a short description for this unique unit.

Step 3

The IPD will automatically connect to XT Web and should display a screen with the Medeco splash screen, prompting the user to Insert Key at the bottom of the screen. If the IPD does not change from the Pairing screen after 2-5 minutes, refer to the troubleshooting section. 

Step 4

Insert a key with a pending or active schedule into the program port and verify it services. 

Image RemovedImage Added